| Ground Floor |
Description - Average U value 0.20W/m2K |
| Soleplate |
38 x 90/140 whitewood |
| Ground floor |
Insulated concrete floor designed by others |
| First Floor |
Description |
| Joists (performance S.I.=1.2) |
J.J.I. Engineered joists x-cut to length
or bottom chord of attic truss |
| Floor Dwangs |
45 x 195 and 35 x 72 |
| Flooring |
22mm P5 moisture resistant T & G chipboard |
| | |
| Walls | Description |
| External panels | 45 x 140 whitewood framing at 600mm c/s |
| U value 0.25W/m2K | 140 x 220 whitewood lintels to openings |
| 9mm OSB3 BBA approved sheathing |
| Reflective breather membrane factory fixed to panels |
| L.B. Partitions | 45 x 90/140 whitewood framing at 600mm centres |
| 90/140 x 220 lintels - one row of dwangs |
| Sill plates | 22 x 90/140 whitewood |
| Head binder | 38 x 90/140 whitewood |
| Firestops | 38 x 50 whitewood offsaw |
| Vent pipe framing | 38 x 50 whitewood offsaw |
| Plumbing/Electrical dwangs | 24 x 100 whitewood offsaw |
| Internal partitions | 38 x 75 whitewood framing at 600mm centres with one row of dwangs |
| | |
| Roof | Description |
Roof trusses at 600c/s |
40 & 45 degree pre-fabricated fink type
varying degree top hat fink type
varying degree pre-fabricated attic type |
| Roof support beams | Beams engineer designed |
| Loose infill rafters | 45 x 220 x-cut to length |
| Apex panels | 40 x 90/140 whitewood framing at 600mm centres |
| 9mm OSB3 BBA approved |
| breather membrane factory fitted to panels |
| Gable ladders | 20 x 145 redwood bargeboard - factory fitted |
| 9mm wbp plywood soffit - factory fitted |
| Roof truss bracing | 25 x 100 whitewood offsaw |
| Sarking | 9mm OSB3 BBA approved |
| Roofing felt | Proctor Multi TX |
| Tilting fillet | 9mm OSB. - pre-cut |
| Fascia boards | 20 x 195 profiled redwood |
| Soffit plywood | 9mm WPB with ventilation slots-mesh fitted |
| Soffit framing | 50 x 50 and 38 x 50 whitewood - pre-cut |
| Eaves vents | Manthorpe G600/620 cross flow eaves panel |
| Plasterboard dwangs | 38 x 50 - pre-cut |
| Counter battens | 13 x 38 whitewood offsaw |
| Tiling battens | 25 x 50 whitewood offsaw |
| | |
| Joinery | Description |
| Windows Whole product U value 1.4W/m2K | Red pine severe exposure rated, traditionally proportioned windows, with a solid horizontal bar.
28mm factory fitted Low “E” doubleglazing (argon filled) night vents and lockable brass handles. Base coat stain. |
| Rooflights | Velux windows c/w flashings to suit |
| External Doors Whole product
U value 1.4W/m2K | FRONT & REAR:Multi-point locking, severe exposure rated, traditionally styled composite construction door set. Brass ironmongery
GARAGE: White factory finished steel, retractable, vertically channelled up and over door with 70 x 70 Redwood door frame. |
| Internal door sets | 6 panel laminated knotty pine (unfinished) door hung in redwood frame |
| 6 pane laminated knotty pine (unfinished) door, preglazed with clear, flat safety glass to vestibule or lounge (1 no per house unless double doors shown). |
| latches/bathroom locks factory fitted |
| 18 x 70 pre-mitred moulded redwood door facings |
| Wardrobes | sliding mirror wardrobe doors to bedrooms where shown (gold frame/silver mirror) |
| Finishings | 14 x 95 moulded redwood skirtings. |
| Redwood window sills and apron plates |
| Stair | Laminated redwood stringers, M.D.F. treads, ply/MDF risers |
| Redwood turned spindles (41mm) and newels (90mm) |
| Shelving | M.D.F. (unfinished) shelving to all wardrobes/cupboards |
| brassed hanging rails |
| slatted shelves to linen cupboards |
| Sundries | Timloc 1168 loft access hatch. |
| Plywood meter board |
| Door furniture | Polished brass “Ascot” lever furniture |
| | |
| Plasterboard, Insulation and Ironmongery | Description |
| Plasterboard | 12.5mm TE Vapourshield to external walls, coomb ceilings and hanging posts |
| 15mm TE plain to ground floor ceiling of 1¾ and 2 storey houses |
| 12.5mm plain to 1 and 1½ storey houses |
|
15mm TE plain to internal partitions |
| 15mm TE fireshield to integral garage ceilings and walls adjacent to house |
| 15mm TE moisture shield to shower and bath walls |
| 135mm Gyproc cornice to lounge, dining, family, hall and vestibule |
| Insulation | U value 0.10W/m2K | 420mm Frametherm 40 to roofspace |
| U value 0.25W/m2K | 140mm Frametherm 35 to external walls |
| U value 0.20W/m2K | 140mm Kingspan TP10 to coomb ceilings |
| U value 0.27W/m2K | 140mm Frametherm 35 to attic hanging posts |
| 43db sound reduction | 25mm acoustic partition roll to all internal portions
100mm fibreglass roll to first floors |
| Structural | Stainless steel wall ties & holding down straps |
| Galvanised truss clips and girder truss shoes |
| Ironmongery | Paslode collated nails for use with Paslode nail tools |
| Collated flooring/plasterboard screws |
Back to top
Print this page